Pulse Output Installation

1 - Water Meter Installation

Existing water meters can be retrofitted with a compatible pulse-output module, where supported.

Water Meters for this installation also can be ordered from the IoT Pro Product Selector, under Water Module Accessories > Water Module Accessories. All water meters are supplied with fittings, are MID-certified for compliant measurement and different BSP threads are available.

The water meter should be installed by qualified personnel on the plumbing branch to be monitored. The supplied cable length is generally sufficient but can be extended as required to reach the IOTPRO device.

2 - Electrical Connections

Two wiring options are provided below: Pulse (with Tamper option) and Pulse Multichannel. Refer to IoT Pro Opening and Closing for instructions on opening the device to access its wiring connections.

3 - Mechanical Installation

Refer to IoT Pro Installation Options for different installation options. Wall anchors are recommended for most applications.

4 - System Commissioning

Device Setup

Activate the IoT Pro device according to the communication network being used:

  1. Activate the Device - Cellular

Platform Setup

Make sure that you have access to the IoT Pro Cloud Platform. Follow the Getting Started guide to familiarize yourself first.

  1. Open the IoT Pro Dashboard Mobile Application and log in

  2. Navigate to Assets and select Create Asset

  3. Under Asset Name & Device:

    1. Enter an Asset Name

    2. Select Application: 5_IOTPRO-Pulse or 9_IOTPRO-PulseMultichannel

    3. Select Device: choose the device installed in the previous section

    4. Assign the asset to a group, if required

  4. Complete the Asset Information fields as required

  5. Under Asset Images, use Take Photo to capture the required photos of the completed installation

  6. Under Advanced Fields, configure the following:

    1. Pulse Ratio

    2. Pulse Offset (calculated from the current meter reading and pulse ratio)

    3. Type

    4. Channel Setting: DIN1 to DIN6 correspond to Channels 1 to 6, respectively

  7. Click Create Asset

  8. Open the IoT Pro Device Setup Mobile Application, reconnect to the installed device, and select Send Message to transmit a new reading

  9. Return to the IoT Pro Dashboard Mobile Application and navigate to Live Map to view your Asset

  10. Use the Metering Dashboard and Pulse Report to view the meter's readings and trends