This guide explains how to install the IoT Pro Radar & Tilt Module in a water or diesel tank. Two installation options are described below.

The required fittings for these installations can be ordered from the IoT Pro Product Selector, under Radar & Tilt Module Accessories > Mechanical Adapter Selection.

Water Tank Installation

Water tanks generally use one of the following installation methods:

• Option B: The plastic lid at the top of the tank can be removed. The Radar & Tilt Module is installed through the lid using the supplied threaded adapter and nut.

• Option C: A suitable hole is made in the tank/reservoir and a threaded flange is fitted to provide the mounting point for the module.

Diesel Tank Installation

Diesel tanks generally have additional threaded ports available at the top of the tank. Select the appropriate adapter size from the IoT Pro Product Selector mentioned above.