IoT Pro Firmware Upgrade

Upgrade Firmware via Bluetooth

Download the firmware ZIP file provided by the IoT Solutions Team on your Android phone
Open the IoT Pro Mobile Application and select the UPGRADE FIRMWARE menu item
Select the UPGRADE MICROCONTROLLER menu item
Select IMPORT FILE and choose the firmware ZIP file downloaded earlier
Select BLUETOOTH SCAN
The application will start scanning for nearby devices. Look for your device named IOTPRO_XXXXXXXX - match the last 8 characters with the last 8 characters of the device ID shown on the silver label on the top of the device
Select your device and wait until the firmware upgrade starts
The Upgrade Status will start updating
Wait until the Upgrade Status shows "Firmware Upgrade Complete"

The upgrade process takes approximately 1-2 minutes. If the upgrade fails, close the application and retry the procedure from step 2.

Do not disconnect or move away from the device during the upgrade process

Contact IoT Solutions.