What you’ll need

• IoT Pro Device (get in touch with our team members from IoT Solutions Website - Contact Us)

• IoT Pro Mobile Application (available from the Downloads section)

Verification of Readings

1. Open the IoT Pro Mobile Application and enter IOT PRO - ACTIVATE

   1. 
      
      

      
      

2. The application will start scanning for nearby devices. Look for your device named IOTPRO_XXXXXXXX - match the last 8 characters with the last 8 characters of the device ID shown on the silver label on the top of the device.

   1. 
      
      

      
      

3. Select your device and wait until it shows Connected in the top bar

   1. 
      
      

      
      

4. Read the application data and check that the temperature readings are within acceptable thresholds. If not, get in touch with our team members from IoT Solutions Website - Contact Us

   1.